At a glance
The 33×12×23 press-on tyre measures 838 mm in overall diameter, 305 mm in section width and 584 mm in inner (band) diameter, with a reference load of 8,150 kg at 10 km/h and 7,065 kg at 16 km/h.
33×12×23 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Overall diameter
838 mm
Section width
305 mm
Inner diameter
584 mm
Reference load capacity
| Operating speed | Reference load |
|---|---|
| 10 km/h | 8,150 kg |
| 16 km/h | 7,065 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
33x12x23 Solid Tyre FAQs
Which forklifts use 33x12x23 press-on tyres?
A heavy cushion size for trucks around the 8-tonne mark, on a 23-inch band. Machines this size usually work container and dock areas where downtime is expensive — solid press-ons remove the flat as a failure mode entirely.
What does the 33x12x23 size designation mean on a press-on tyre?
Press-on sizes read as diameter x width x band diameter in inches, so 33x12x23 gives all three numbers at once. The band diameter is the critical one — it must match the wheel you are pressing onto. Full dimensions are in the table above.
Are non-marking 33x12x23 press-on tires available?
Yes — and non-marking is one of the most requested compounds in cushion sizes, since these trucks mostly work polished indoor floors in food, pharma, electronics and retail. Non-marking rubber gives up some wear life for the clean-floor benefit; we will tell you how that trade lands for your site.
Do press-on tyres need air pressure or any maintenance?
None — nothing to inflate, no valve, no pressure checks. The only maintenance is visual: watch wear approaching the steel band, and cuts or chunking. That is exactly why indoor fleets like them — a cushion truck never loses a shift to a flat.
Which forklift brands use 33x12x23 press-on tyres?
This size is common across electric forklift and reach truck lines from Crown, Raymond, Toyota, Linde and Chinese brands. Press-on fitment is set by the wheel band diameter, so the sure check is measuring the wheel or reading the old tyre's sidewall.
Can we get 33x12x23 press-on tyres with our own brand?
Yes — OEM sidewall markings and packaging are standard for importer and dealer customers, and cushion moulds make custom branding straightforward. Ask the sales team for minimum quantities per compound.
What does a fresh 33x12x23 press-on change on the truck?
Traction, load cushioning and floor protection come back immediately — operators usually notice smoother travel on the first shift. Running worn press-ons does the opposite: hardened rubber transmits shock into the drive and suspension, which is how a cheap tyre ends up causing an expensive gearbox repair.
What should a 33x12x23 inquiry include?
The size (or a photo of the old tyre's sidewall), quantity, compound — black or non-marking — and destination port. Say at this stage if you want wheels mounted. Our sales team confirms price and schedule within one business day.