At a glance
The 24×9×17 press-on tyre measures 610 mm in overall diameter, 229 mm in section width and 432 mm in inner (band) diameter, with a reference load of 4,700 kg at 10 km/h and 4,075 kg at 16 km/h.
24×9×17 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Overall diameter
610 mm
Section width
229 mm
Inner diameter
432 mm
Reference load capacity
| Operating speed | Reference load |
|---|---|
| 10 km/h | 4,700 kg |
| 16 km/h | 4,075 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
24x9x17 Solid Tyre FAQs
Which trucks use 24x9x17 press-on solid tires?
A 3.5-tonne class cushion size on the 17-inch band family. At this size, press-on tyres carry serious loads all day on indoor floors — the weekly wear check recommended in the FAQs below matters more, not less.
What does the 24x9x17 size designation mean on a press-on tyre?
Press-on sizes read as diameter x width x band diameter in inches, so 24x9x17 gives all three numbers at once. The band diameter is the critical one — it must match the wheel you are pressing onto. Full dimensions are in the table above.
Are non-marking 24x9x17 press-on tires available?
Yes — and non-marking is one of the most requested compounds in cushion sizes, since these trucks mostly work polished indoor floors in food, pharma, electronics and retail. Non-marking rubber gives up some wear life for the clean-floor benefit; we will tell you how that trade lands for your site.
Do press-on tyres need air pressure or any maintenance?
None — nothing to inflate, no valve, no pressure checks. The only maintenance is visual: watch wear approaching the steel band, and cuts or chunking. That is exactly why indoor fleets like them — a cushion truck never loses a shift to a flat.
Which forklift brands use 24x9x17 press-on tyres?
This size is common across electric forklift and reach truck lines from Crown, Raymond, Toyota, Linde and Chinese brands. Press-on fitment is set by the wheel band diameter, so the sure check is measuring the wheel or reading the old tyre's sidewall.
Can we get 24x9x17 press-on tyres with our own brand?
Yes — OEM sidewall markings and packaging are standard for importer and dealer customers, and cushion moulds make custom branding straightforward. Ask the sales team for minimum quantities per compound.
What does a fresh 24x9x17 press-on change on the truck?
Traction, load cushioning and floor protection come back immediately — operators usually notice smoother travel on the first shift. Running worn press-ons does the opposite: hardened rubber transmits shock into the drive and suspension, which is how a cheap tyre ends up causing an expensive gearbox repair.
What should a 24x9x17 inquiry include?
The size (or a photo of the old tyre's sidewall), quantity, compound — black or non-marking — and destination port. Say at this stage if you want wheels mounted. Our sales team confirms price and schedule within one business day.