At a glance
The 22×7×17 press-on tyre measures 559 mm in overall diameter, 178 mm in section width and 432 mm in inner (band) diameter, with a reference load of 3,150 kg at 10 km/h and 2,730 kg at 16 km/h.
22×7×17 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Overall diameter
559 mm
Section width
178 mm
Inner diameter
432 mm
Reference load capacity
| Operating speed | Reference load |
|---|---|
| 10 km/h | 3,150 kg |
| 16 km/h | 2,730 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
22x7x17 Solid Tyre FAQs
What trucks take 22x7x17 press-on tyres?
22x7x17 is a 3-tonne class cushion size on a 17-inch band. Band diameters in cushion tyres step up quickly across sizes, so read the old sidewall rather than estimating — a half-inch mismatch means the tyre will not fit the wheel.
What does the 22x7x17 size designation mean on a press-on tyre?
Press-on sizes read as diameter x width x band diameter in inches, so 22x7x17 gives all three numbers at once. The band diameter is the critical one — it must match the wheel you are pressing onto. Full dimensions are in the table above.
Are non-marking 22x7x17 press-on tires available?
Yes — and non-marking is one of the most requested compounds in cushion sizes, since these trucks mostly work polished indoor floors in food, pharma, electronics and retail. Non-marking rubber gives up some wear life for the clean-floor benefit; we will tell you how that trade lands for your site.
Do press-on tyres need air pressure or any maintenance?
None — nothing to inflate, no valve, no pressure checks. The only maintenance is visual: watch wear approaching the steel band, and cuts or chunking. That is exactly why indoor fleets like them — a cushion truck never loses a shift to a flat.
Which forklift brands use 22x7x17 press-on tyres?
This size is common across electric forklift and reach truck lines from Crown, Raymond, Toyota, Linde and Chinese brands. Press-on fitment is set by the wheel band diameter, so the sure check is measuring the wheel or reading the old tyre's sidewall.
Can we get 22x7x17 press-on tyres with our own brand?
Yes — OEM sidewall markings and packaging are standard for importer and dealer customers, and cushion moulds make custom branding straightforward. Ask the sales team for minimum quantities per compound.
What does a fresh 22x7x17 press-on change on the truck?
Traction, load cushioning and floor protection come back immediately — operators usually notice smoother travel on the first shift. Running worn press-ons does the opposite: hardened rubber transmits shock into the drive and suspension, which is how a cheap tyre ends up causing an expensive gearbox repair.
What should a 22x7x17 inquiry include?
The size (or a photo of the old tyre's sidewall), quantity, compound — black or non-marking — and destination port. Say at this stage if you want wheels mounted. Our sales team confirms price and schedule within one business day.