At a glance
The 27×10×19 press-on tyre measures 686 mm in overall diameter, 254 mm in section width and 483 mm in inner (band) diameter, with a reference load of 5,700 kg at 10 km/h and 4,940 kg at 16 km/h.
27×10×19 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Overall diameter
686 mm
Section width
254 mm
Inner diameter
483 mm
Reference load capacity
| Operating speed | Reference load |
|---|---|
| 10 km/h | 5,700 kg |
| 16 km/h | 4,940 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
27x10x19 Solid Tyre FAQs
What equipment uses 27x10x19 press-on tyres?
A heavy cushion size for 4–5 tonne electric trucks, on a 19-inch band. Sizes this large often make sense ordered pre-mounted on wheels — the pressing work is substantial and not every workshop has the equipment for it.
What does the 27x10x19 size designation mean on a press-on tyre?
Press-on sizes read as diameter x width x band diameter in inches, so 27x10x19 gives all three numbers at once. The band diameter is the critical one — it must match the wheel you are pressing onto. Full dimensions are in the table above.
Are non-marking 27x10x19 press-on tires available?
Yes — and non-marking is one of the most requested compounds in cushion sizes, since these trucks mostly work polished indoor floors in food, pharma, electronics and retail. Non-marking rubber gives up some wear life for the clean-floor benefit; we will tell you how that trade lands for your site.
Do press-on tyres need air pressure or any maintenance?
None — nothing to inflate, no valve, no pressure checks. The only maintenance is visual: watch wear approaching the steel band, and cuts or chunking. That is exactly why indoor fleets like them — a cushion truck never loses a shift to a flat.
Which forklift brands use 27x10x19 press-on tyres?
This size is common across electric forklift and reach truck lines from Crown, Raymond, Toyota, Linde and Chinese brands. Press-on fitment is set by the wheel band diameter, so the sure check is measuring the wheel or reading the old tyre's sidewall.
Can we get 27x10x19 press-on tyres with our own brand?
Yes — OEM sidewall markings and packaging are standard for importer and dealer customers, and cushion moulds make custom branding straightforward. Ask the sales team for minimum quantities per compound.
What does a fresh 27x10x19 press-on change on the truck?
Traction, load cushioning and floor protection come back immediately — operators usually notice smoother travel on the first shift. Running worn press-ons does the opposite: hardened rubber transmits shock into the drive and suspension, which is how a cheap tyre ends up causing an expensive gearbox repair.
What should a 27x10x19 inquiry include?
The size (or a photo of the old tyre's sidewall), quantity, compound — black or non-marking — and destination port. Say at this stage if you want wheels mounted. Our sales team confirms price and schedule within one business day.