At a glance
The 28×9×15(Band) press-on tyre measures 711 mm in overall diameter, 229 mm in section width and 381 mm in inner (band) diameter, with a reference load of 4,700 kg at 10 km/h and 4,075 kg at 16 km/h.
28×9×15(Band) published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Overall diameter
711 mm
Section width
229 mm
Inner diameter
381 mm
Reference load capacity
| Operating speed | Reference load |
|---|---|
| 10 km/h | 4,700 kg |
| 16 km/h | 4,075 kg |
Catalogue note: Band type.
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
28x9x15 band Solid Tyre FAQs
What is a band-type press-on tyre (28x9x15 band)?
The band version comes with the steel band supplied as part of the assembly, for wheel systems that require it. If your trucks run band-type wheels, say so in the inquiry — the band specification must match the wheel system exactly, and we will confirm it from a photo or drawing.
What does the 28x9x15 band size designation mean on a press-on tyre?
Press-on sizes read as diameter x width x band diameter in inches, so 28x9x15 band gives all three numbers at once. The band diameter is the critical one — it must match the wheel you are pressing onto. Full dimensions are in the table above.
Are non-marking 28x9x15 band press-on tires available?
Yes — and non-marking is one of the most requested compounds in cushion sizes, since these trucks mostly work polished indoor floors in food, pharma, electronics and retail. Non-marking rubber gives up some wear life for the clean-floor benefit; we will tell you how that trade lands for your site.
Do press-on tyres need air pressure or any maintenance?
None — nothing to inflate, no valve, no pressure checks. The only maintenance is visual: watch wear approaching the steel band, and cuts or chunking. That is exactly why indoor fleets like them — a cushion truck never loses a shift to a flat.
Which forklift brands use 28x9x15 band press-on tyres?
This size is common across electric forklift and reach truck lines from Crown, Raymond, Toyota, Linde and Chinese brands. Press-on fitment is set by the wheel band diameter, so the sure check is measuring the wheel or reading the old tyre's sidewall.
Can we get 28x9x15 band press-on tyres with our own brand?
Yes — OEM sidewall markings and packaging are standard for importer and dealer customers, and cushion moulds make custom branding straightforward. Ask the sales team for minimum quantities per compound.
What does a fresh 28x9x15 band press-on change on the truck?
Traction, load cushioning and floor protection come back immediately — operators usually notice smoother travel on the first shift. Running worn press-ons does the opposite: hardened rubber transmits shock into the drive and suspension, which is how a cheap tyre ends up causing an expensive gearbox repair.
What should a 28x9x15 band inquiry include?
The size (or a photo of the old tyre's sidewall), quantity, compound — black or non-marking — and destination port. Say at this stage if you want wheels mounted. Our sales team confirms price and schedule within one business day.