At a glance
The 4.00-8 solid tyre runs on a 3.00 rim, measures 400 mm in overall diameter and 111 mm in section width, and carries 1,055 kg per tyre on a drive axle at 10 km/h (845 kg on a steer axle). Available tread patterns: YY-101/YY-102.
4.00-8 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Recommended rim
3.00
Overall diameter
400 mm
Section width
111 mm
Tread pattern
YY-101/YY-102
Reference load capacity by speed
| Speed | Drive axle | Steer axle |
|---|---|---|
| 10 km/h | 1,055 kg | 845 kg |
| 16 km/h | 1,020 kg | 765 kg |
| 26 km/h | 950 kg | 715 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
4.00-8 Solid Tyre FAQs
What equipment uses 4.00-8 solid tyres?
The 4.00-8 is one of the most common sizes for light industrial equipment, including 1–2 tonne electric forklifts, warehouse trucks and tow tractors. If you are replacing tyres on existing equipment, check the size moulded into the sidewall of your current tyres — if it reads 4.00-8, this size page is the right reference.
What rim does a 4.00-8 solid tyre fit?
The 4.00-8 solid tyre is designed for a 3.00 rim. Before ordering, confirm the rim or wheel diameter on your equipment, because solid tyres must be mounted on the correct rim size to carry the published load ratings.
How much load can a 4.00-8 solid tyre carry?
Reference load capacity depends on speed and axle position. For the JABIL 4.00-8: 1,055 kg per tyre at 10 km/h on a drive axle, reducing to 1,020 kg at 16 km/h and 950 kg at 26 km/h. Steer axle ratings are lower — see the load chart above. Final selection should always be confirmed against your equipment's actual duty cycle.
Is a non-marking 4.00-8 solid tyre available?
They are. Non-marking compound options are available for indoor applications such as food, pharmaceutical and clean-floor warehouses. Tell us your operating environment when requesting a quote and we will recommend the right compound.
What is the MOQ and lead time for 4.00-8 solid tyres?
MOQ and production lead time depend on quantity, compound and destination country. JABIL works with importers and dealers worldwide, from trial orders to full container loads. Send your quantity, destination and required date through the quote form and our sales team will confirm the schedule within one business day.
Can I replace pneumatic tyres with 4.00-8 solid tyres on my forklift?
In most cases, yes — as long as the size and rim match what the truck is running now. A solid 4.00-8 mounts on the same 3.00 rim as the pneumatic version, so there is no conversion work involved. The ride feels slightly firmer, which is why solid tyres suit indoor and yard work better than rough ground. If your trucks spend time outdoors on uneven surfaces, mention that in your inquiry and we will confirm suitability before you order.
How should 4.00-8 solid tyres be stored before use?
Keep them in a cool, dry place away from direct sunlight and heat sources, standing upright rather than stacked flat. Ozone from nearby electric motors and welding equipment ages rubber over time, so don't warehouse tyres next to running machinery. Beyond that, storage is simple — a solid tyre holds no air pressure, so one that has sat properly in your warehouse for months is still ready to mount.
Do you also supply rims or complete wheels for 4.00-8?
Yes, and this is worth deciding before you order — JABIL can ship tyres on their own or mounted on wheels. Choosing pre-assembled wheels saves your workshop the pressing work on arrival, which matters if you don't have mounting equipment in house. Ask for both options in one quotation and we will price them side by side.
Is this the same industrial tire used on 3-wheel forklifts in North America?
Yes. The 4.00-8 is widely listed as a compact industrial tire for 3-wheel and small electric forklifts in North American catalogs. Dimensions and rim fitment are identical — see the size chart above.