At a glance
The 28×9-16 solid tyre runs on a 6.50 rim, measures 675 mm in overall diameter and 190 mm in section width, and carries 4,090 kg per tyre on a drive axle at 10 km/h (3,270 kg on a steer axle). Available tread patterns: YY-101.
28×9-16 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Recommended rim
6.50
Overall diameter
675 mm
Section width
190 mm
Tread pattern
YY-101
Reference load capacity by speed
| Speed | Drive axle | Steer axle |
|---|---|---|
| 10 km/h | 4,090 kg | 3,270 kg |
| 16 km/h | — | — |
| 26 km/h | 3,675 kg | 2,755 kg |
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
28x9-16 Solid Tyre FAQs
Which forklifts use 28x9-16 solid tyres?
28x9-16 is a heavy 16-inch rim size for large counterbalance trucks, 5–6 tonnes and up. Do not confuse it with 28x9-15 — the rim diameter differs and the two are not interchangeable. The sidewall reading is always final.
What rim does a 28x9-16 solid tyre require?
The rim size is in the specification table above — and it matters, because solid tyres only deliver their published load ratings on the correct rim. If you are unsure what your truck runs, send us the equipment brand and model and we will confirm before you order.
Are non-marking 28x9-16 tires available?
Yes. The light-grey non-marking compound suits food, pharmaceutical, electronics and retail floors where black scuffs are unacceptable. Non-marking rubber trades some wear life for the clean-floor property — tell us the site and we will say honestly which side of that trade you should take.
What load can a 28x9-16 solid forklift tyre carry?
Load depends on speed and axle position — the chart above gives the reference values. Check the drive-axle figure at your site's actual top speed rather than the headline maximum. If your duty cycle sits between two ratings, send us the truck data and we will confirm the safe choice.
What is the MOQ for 28x9-16 solid tyres?
Flexible — trial quantities of one or two pallets through to full container loads. Importers usually start small to test wear on their own trucks, then consolidate mixed sizes into one container for wholesale pricing. Share your quantity and destination for a firm schedule.
Which forklift brands does the 28x9-16 size fit?
28x9-16 is a standard industrial size, so it fits the equivalent position across Toyota, Komatsu, Hyster, Linde, Mitsubishi and most Chinese brands. The reliable check is always the size moulded on your current tyre's sidewall — match it and the fitment is correct.
What compounds can I choose for 28x9-16?
Standard black abrasion-resistant rubber covers most indoor and yard work; non-marking suits clean-floor sites. Beyond those, being the factory means we can adjust compound for heat, oil exposure or heavy debris — a flexibility you do not get buying off a distributor's shelf.
How are 28x9-16 solid tyres shipped?
Loose on pallets or mounted on wheels, in LCL or full containers, export packed. We ship worldwide and quote to your port — tell us the destination and preferred terms (FOB/CIF) with the inquiry and the sales team will structure it.