At a glance
The 33.5×15-28 aerial lift solid tyre runs on a 12.00 rim, measures 851 mm in overall diameter and 381 mm in section width, with a reference load of 7,000 kg and a typical application in Large Boom Lift.
33.5×15-28 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Recommended rim
12.00
Overall diameter
851 mm
Section width
381 mm
Reference load
7,000 kg
Application
Large Boom Lift
Tread pattern
Lug
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
33.5x15-28 Solid Tyre FAQs
What machines use 33/5x15-28 tyres?
One of the largest sizes in our aerial range. Fitment at the top of the range is best confirmed case by case, so send a sidewall photo or the machine's data plate details and we will cross-reference it for you before quoting — markings on sizes this large are easy to transcribe wrong.
What does the 33.5x15-28 designation mean on an aerial tyre?
Aerial sizes mix imperial and metric notations depending on the machine manufacturer — 33.5x15-28 is the format the lifts themselves use. The table above gives exact dimensions. If your old tyre carries a similar but different-looking marking, send a sidewall photo and we will cross-reference it.
What compounds are available for 33.5x15-28?
Standard black for outdoor and rough-terrain machines, non-marking grey for indoor floors — both carry the same load ratings, so the choice is about floor marking and environment, not capacity. For continuous hot-climate outdoor use we can also adjust the compound; Middle East rental fleets ask for this often.
How do I confirm 33.5x15-28 is the right tyre before ordering?
Read the size off the current tyre's sidewall or the machine's data plate, note the lift brand and model, and send both with your inquiry. We confirm fitment and compound in one exchange — that single message prevents the most common ordering mistake in this category.
Do you supply aerial tyres wholesale to rental companies?
Yes — aerial tyre distributors and equipment rental fleets are core customers, buying factory-direct from pallet quantities to full containers worldwide. OEM branding is available for fleets running their own label, and pricing reflects direct-from-manufacturer terms.
Can we order a trial quantity of 33.5x15-28?
Yes — a pallet to verify fitment and wear across a few machines is the normal entry point. Trial pricing sits above container volume, and the same specification carries over when you scale up, with no re-approval needed.
How are 33.5x15-28 tyres shipped?
Palletized in export packing, LCL or full container, from our factory to your port. Mixing aerial sizes with forklift and press-on sizes in one container is routine for us — list all sizes in the inquiry and we will plan the load.
What makes aerial solid tyres different from forklift solid tyres?
Both are solid rubber, but the specification priorities differ: aerial tyres are built for platform stability and often non-marking compounds, while forklift tyres are optimised for drive-axle load cycles. The moulds, compounds and load lines are separate — so order from the aerial range for lifts rather than converting a forklift size.