At a glance
The 10×16.5 aerial lift solid tyre runs on a NA rim, measures 575 mm in overall diameter and 254 mm in section width, with a reference load of 3,000 kg and a typical application in Boom Lift / Telehandler.
10×16.5 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Recommended rim
NA
Overall diameter
575 mm
Section width
254 mm
Reference load
3,000 kg
Application
Boom Lift / Telehandler
Tread pattern
Lug
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
10x16.5 Solid Tyre FAQs
Which machines use 10x16.5 solid tyres?
10x16.5 serves larger boom lifts and rough-terrain platforms in the aerial range. These machines often work outdoors in UV and heat, which is worth mentioning in your inquiry — compound choice follows the working environment.
Why do aerial work platforms use solid tyres?
A scissor lift or boom lift cannot afford a flat — the machine often works at height, on a site schedule, and a disabled unit blocks the whole work area. Solid tyres remove punctures entirely and keep the platform's rated load and stability intact, which is why most lift manufacturers fit solids or foam-filled as standard.
Are non-marking tyres available for 10x16.5?
Yes — and indoors they are the default: shopping malls, airports, warehouses with finished floors. Non-marking scissor lift tyres are among our most exported items to rental fleets. Confirm the compound in your quote request and we will match it.
What is the load rating of the 10x16.5 aerial tyre?
The reference figures are in the table above, by speed. On aerial platforms the load rating matters for stability as much as wear — the tyre must carry the platform's rated capacity with margin. If the machine's data plate specifies a tyre load rating, match it exactly; this is not a category for approximations.
Which lift brands does 10x16.5 fit?
This size is used across scissor lift and boom lift lines from brands such as Genie, JLG and Skyjack. Fitment is confirmed by the size on the current tyre's sidewall or the machine data plate — match it and the tyre is correct.
What is the MOQ for 10x16.5 aerial tyres?
Pallet quantities upward, wholesale pricing factory-direct, and mixed aerial sizes consolidate into one container. Rental companies routinely combine this size with forklift sizes in the same load — just list everything in the inquiry.
When should aerial platform tyres be replaced?
On cuts, chunking, or wear reaching the wear indicators — any change to the tyre profile can affect platform stability. Outdoor machines also age their tyres in UV and ozone even with tread left, so units parked outside for years deserve an inspection before the next job at height.
Can you supply 10x16.5 tyres mounted on wheels?
Yes, loose or pressed onto wheels. Rental companies often order mounted wheels to swap units in the field without a press. Ask for both options in one inquiry and we will quote them together.