At a glance
The 25×8-14 aerial lift solid tyre runs on a 6.50 rim, measures 635 mm in overall diameter and 203 mm in section width, with a reference load of 2,500 kg and a typical application in Boom Lift.
25×8-14 published specifications
The values below reproduce the current JABIL size table in a dedicated, searchable format. They are reference values for initial comparison, not a substitute for confirming the machine, axle and duty cycle before purchase.
Recommended rim
6.50
Overall diameter
635 mm
Section width
203 mm
Reference load
2,500 kg
Application
Boom Lift
Tread pattern
Lug
Information needed to confirm fitment
Selection note
Load ratings can change with speed, axle position, load centre, surface, ambient temperature and continuous running time. Send the equipment details to JABIL for confirmation before placing an order.
Related sizes
Related Reading
25x8-14 Solid Tyre FAQs
What equipment uses 25x8-14 aerial tyres?
A larger scissor lift size on bigger electric and rough-terrain platforms. Confirm the load rating on the machine's data plate and match it exactly — platform stability depends on the tyre carrying rated capacity with margin.
What does the 25x8-14 designation mean on an aerial tyre?
Aerial sizes mix imperial and metric notations depending on the machine manufacturer — 25x8-14 is the format the lifts themselves use. The table above gives exact dimensions. If your old tyre carries a similar but different-looking marking, send a sidewall photo and we will cross-reference it.
What compounds are available for 25x8-14?
Standard black for outdoor and rough-terrain machines, non-marking grey for indoor floors — both carry the same load ratings, so the choice is about floor marking and environment, not capacity. For continuous hot-climate outdoor use we can also adjust the compound; Middle East rental fleets ask for this often.
How do I confirm 25x8-14 is the right tyre before ordering?
Read the size off the current tyre's sidewall or the machine's data plate, note the lift brand and model, and send both with your inquiry. We confirm fitment and compound in one exchange — that single message prevents the most common ordering mistake in this category.
Do you supply aerial tyres wholesale to rental companies?
Yes — aerial tyre distributors and equipment rental fleets are core customers, buying factory-direct from pallet quantities to full containers worldwide. OEM branding is available for fleets running their own label, and pricing reflects direct-from-manufacturer terms.
Can we order a trial quantity of 25x8-14?
Yes — a pallet to verify fitment and wear across a few machines is the normal entry point. Trial pricing sits above container volume, and the same specification carries over when you scale up, with no re-approval needed.
How are 25x8-14 tyres shipped?
Palletized in export packing, LCL or full container, from our factory to your port. Mixing aerial sizes with forklift and press-on sizes in one container is routine for us — list all sizes in the inquiry and we will plan the load.
What makes aerial solid tyres different from forklift solid tyres?
Both are solid rubber, but the specification priorities differ: aerial tyres are built for platform stability and often non-marking compounds, while forklift tyres are optimised for drive-axle load cycles. The moulds, compounds and load lines are separate — so order from the aerial range for lifts rather than converting a forklift size.